Auto-Torq Installation Instructions

Auto-Torq® axle fastener installation guidance covers preparation, tightening, bearing seating, and inspection for proper wheel-end assembly. The procedure directs users to install the fastener by hand, tighten until a clear clicking or ratcheting feedback is reached, continue rotating the fastener and hub to seat the bearings, and verify the final setup with a dial indicator. The chart also lists required sockets for trailer axle fastener part numbers and notes that Auto-Torq® should not be used with systems that require a spacer.

Key Points

  • Covers Auto-Torq® axle fastener installation and bearing adjustment procedures.
  • Explains hub, seal, spindle, thread inspection, and lubrication preparation steps.
  • Specifies tightening guidance, including the limiting feedback point and warning not to use an impact gun.
  • Provides dial indicator inspection guidance for verifying wheel-end endplay.
  • Includes English/Spanish and English/French installation instructions with required socket references.
Congratulations!

You finished Part 1 of the TQM Wheel End Training course. To continue to the Part 2 TQM Wheel End videos, please click one of the TAKE COURSE buttons below.

To rewatch the Part 1 TQM Wheel End Video, close this pop-up by clicking the X in the top right corner.

To return to the home screen and select another video, click BACK TO STEMCO UNIVERSITY.

Has Prerequisite

TQM Wheel End Part 2 – Grit Guard® Installation

Requires TQM Wheel End Training Part 1

Has Prerequisite

TQM Wheel End Part 2 – Guardian® HP Installation

Requires TQM Wheel End Training Part 1

Has Prerequisite

TQM Wheel End Part 2 – Discover®/Voyager® Installation

Requires TQM Wheel End Training Part 1

Email this resource to yourself

We’ll send you a download link of this resource to your inbox.

"*" indicates required fields

Name*