STEMCO Products Inc. (“STEMCO”) offers this website, including all information and services available from this website or offered as part of or in conjunction with this website (the “Website”), to you, the user, conditioned upon your acceptance of all of the terms, conditions, policies and notices set forth below (“Terms and Conditions”). Your continued use of the Website constitutes your agreement to be bound by the Terms and Conditions.
Terms and Conditions No Warranties
The information contained on this Website is provided without any warranties or representations as to accuracy, completeness or timeliness. STEMCO does not warrant that the Website or its operation will be accurate, reliable, uninterrupted or error-free. STEMCO assumes no liability or responsibility for any errors or omissions in the content or operation of the Website. STEMCO reserves the right to modify the information contained in this Website without notice, and makes no commitment to update the information contained in this Website. USE THE WEBSITE AT YOUR OWN RISK. THIS WEBSITE IS PROVIDED TO YOU “AS IS,” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. Please note that some jurisdictions may not allow the exclusion of implied warranties, so some of the above exclusions may not apply. STEMCO also assumes no responsibility for, and shall not be liable for, any damages to, or viruses that may infect, your computer equipment or other property as a result of your access to, use of, or browsing in the Website or your downloading of any files, images, text or other materials from the Website.
Exclusion of Liability
IN NO EVENT WILL STEMCO OR ANY OF ITS AFFILIATES BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY OR OTHER DAMAGES ARISING OUT OF THE USE OF THIS WEBSITE, INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION AND LOSS OF PROGRAMS OR OTHER DATA.
All material contained on the Website (including all software, HTML code, Java applets, Active X controls and other code) is protected by United States and foreign copyright laws. Except as otherwise expressly provided in these terms and conditions, you may not copy, distribute, transmit, display, perform, reproduce, publish, license, modify, rewrite, create derivative works from, transfer, or sell any material contained on the Website without the prior consent of STEMCO. You may make single copies of materials displayed on the Website for your own use only, provided any copies include the copyright and other notices displayed with the materials on the Website. You may not distribute such copies to others, whether or not for a charge or other consideration, without prior written permission from STEMCO. Any unauthorized use of any materials on the Website may violate copyright laws, trademark laws, laws of privacy and publicity, and communications regulations and statutes. Violation of this provision may result in substantial civil and criminal penalties.
The trademarks, logos, and service marks (collectively the “Trademarks”) displayed on the Website are trademarks of STEMCO and its affiliates. Other trademarks appear on the Website with permission from their respective owners. Nothing contained on the Website should be construed as granting any license or right to use any Trademark displayed on the Website. Unauthorized use of the Trademarks is strictly prohibited and may constitute trademark infringement, which could subject you to substantial civil and criminal penalties. STEMCO will aggressively enforce its trademark rights to the fullest extent of the law, including the seeking of criminal prosecution.
Any communication or material you transmit to STEMCO using the Website or via electronic mail to any address listed on the Website, including any data, questions, comments, suggestions or the like, is and will be treated as non-confidential and non-proprietary, shall become the property of STEMCO or its affiliates, and may be used by STEMCO for any purpose.
Links and Linking
This Website may contain hyperlinks to other websites. Such links are meant solely for the user’s convenience. STEMCO has no control over, and is not responsible for the content found on, external websites. Links to such third party websites do not constitute sponsorship, endorsement or approval of such websites or the contents thereof. You may establish a link to this Website, provided that (i) you do not remove or obscure the copyright notice or other notices on this Website, (ii) you give STEMCO notice of such link by sending an e-mail to firstname.lastname@example.org, providing the URL of the page(s) where the link will appear and information on the owner of the URL, and (iii) you discontinue providing a link to this Website if so requested by STEMCO or its affiliates. STEMCO reserves the right to revoke this license generally, or your right to use specific links, at any time. Under no circumstances may you “frame” the Website or any of its content or copy portions of the Website to a server, except as part of an Internet service provider’s incidental caching of pages. Each page within the Website must be displayed in full (including all trademarks, branding, advertising and promotional materials), without any accompanying frame, border, margin, design, branding, trademark, advertising or promotional materials not originally displayed on the page within the Website.
STEMCO and its affiliates may collect the IP addresses of visitors to the Website. This information may be aggregated to measure the number of visits, average time of visit, pages viewed, etc., in order to measure the use of the Website and improve content as may be necessary. STEMCO only collects personal information from our visitors that is submitted on a voluntary basis. Personal information may include name, title, company, address, e-mail address, phone number and the like. Unless specifically stated, we do not require this information to obtain access to any part of the Website. STEMCO has no intention of collecting any personal data from individuals under 13 years of age.
STEMCO may place a “cookie” on the browser of your computer. The cookie itself does not contain any personally identifying information. A cookie may be used to tell when your computer has contacted the Website. STEMCO uses the information for editorial purposes and for other purposes such as delivery of features and advertisements, so that STEMCO can customize delivery of information to you without compromising privacy.
Termination of Privileges
STEMCO reserves the right to terminate your privilege of using all or any portion of the Website if you breach any of these Terms and Conditions.
Governing Law and Jurisdiction
The Website is controlled and operated by STEMCO from its principal office in the State of Texas. STEMCO makes no representation that materials on the Website are appropriate or available for use in other locations. Those who choose to access the Website from other locations do so on their own initiative and are responsible for compliance with all applicable local laws, rules and regulations, including, without limitation, export laws and regulations. The Website is not intended to subject STEMCO to the laws or jurisdiction of any state, country or territory other than the State of Texas. The laws of the State of Texas will govern the enforcement of these Terms and Conditions and any disputes that may arise hereunder or result from your use of this Website, and you agree to submit to the exclusive personal jurisdiction and venue of any state or federal court located therein.
These Terms and Conditions constitute the entire agreement and understanding between you and STEMCO with respect to use of the Website, superseding all prior or contemporaneous communications and/or proposals. STEMCO reserves the right to make changes to these Terms and Conditions immediately by posting the changed Terms and Conditions in this location. By continuing to use the Website, you are agreeing to all changes made by STEMCO. A printed version of these Terms and Conditions shall be admissible in judicial or administrative proceedings based upon or relating to use of the Website to the same extent, and subject to the same conditions, as other business documents and records originally generated and maintained in printed form.
You finished Part 1 of the TQM Wheel End Training course. To continue to the Part 2 TQM Wheel End videos, please click one of the TAKE COURSE buttons below.
To rewatch the Part 1 TQM Wheel End Video, close this pop-up by clicking the X in the top right corner.
To return to the home screen and select another video, click BACK TO STEMCO UNIVERSITY.